Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Manuel De Montage

3com S7906E Manuel De Montage

Télécharger
Page de 2621
 
1-12 
To do… 
Use the command… 
Remarks 
Enter system view 
system-view 
— 
Enter the interface view of the 
monitor port 
interface interface-type interface-number 
— 
For an access 
port 
port access vlan vlan-id 
For a trunk port 
port trunk permit vlan vlan-id 
Assign the 
port to the 
probe VLAN 
For a hybrid 
port 
port hybrid vlan vlan-id { tagged | 
untagged } 
Required 
Use one of the 
commands 
 
 
For more information about the port access vlan command, the port trunk permit vlan command, 
and the port hybrid vlan command, see VLAN Commands in the Access Volume. 
 
Configuring Layer 3 Remote Port Mirroring 
Layer 3 Remote Port Mirroring Configuration Task List 
To configure Layer 3 remote port mirroring, you need to create a local port mirroring group on the 
source device as well as on the destination device, and configure mirroring port and the monitor port for 
each mirroring group. The source and destination devices are connected by a tunnel. 
z 
On the source device, you need to configure the port you want to monitor as the mirroring port, and 
configure the tunnel interface as the monitor port.  
z 
On the destination device, you need to configure the physical port corresponding to the tunnel 
interface as the mirroring port and configure the port that connects the data monitoring device as 
the monitor port.  
Complete these tasks to configure Layer 3 remote port mirroring: 
Task 
Remarks 
Required 
Required 
Configuring the source 
device 
Required 
Required 
Required 
Configuring the 
destination device 
Required