3com S7906E Manuel De Montage

Page de 2621
 
2-7 
 
 
Up to two OLT ports can be added to one backup group. An OLT port can be added to only one 
backup group at a time. The port added to the backup group earlier will be the master port, while 
the other port will be the standby port. 
 
Only one of the two OLT ports in a fiber backup group can be in the forwarding state.  
 
After the second OLT port is added to a backup group, you need to manually synchronize the 
configurations of the first OLT port and all the ONUs under it to the second OLT port. This ensures 
normal service operation after a master/standby switchover. 
 
Displaying and Maintaining OLT Configuration 
To do... 
Use the command... 
Remarks 
Display related information of 
EPON parameters 
display epon-parameter slot 
slot-number
 
Available in FTTH view only 
Display the information about 
all the ONUs under an OLT 
port, ONU port, or the EPON 
board in the specified slot 
display onuinfo
 { interface 
interface-type interface-number
 
slot slot-number } 
Display the information about 
the legal ONU with the 
specified MAC address 
display onuinfo mac-address 
mac-address 
Display the information about 
all the silent ONUs connected 
to the specified OLT port or to 
the EPON card seated in the 
specified slot 
display onuinfo silent 
{ interface interface-type 
interface-number
 
| slot 
slot-number 
} 
Display the optical parameter 
information of an OLT port 
display optics-parameters 
interface 
interface-type 
interface-number
 
Display port version information 
display epon-version 
interface 
interface-type 
interface-number
 
Display port capability 
information 
display epon-capability 
interface 
interface-type 
interface-number
 
Display the current work mode 
of a port 
display epon-workmode 
interface 
interface-type 
interface-number
 
Display the statistics on a port 
display epon statistics 
interface 
interface-type 
interface-number
 
Display the OAM information 
about an ONU 
display epon-oam interface 
interface-type interface-number
Display the master/standby 
port information of a backup 
group 
display fiber-backup group
 
all group-number 
Available in any view