Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Manuel De Montage

3com S7906E Manuel De Montage

Télécharger
Page de 2621
 
3-18 
 
After you configure the updating of the ONUs corresponding to all the created ONU ports under an OLT 
port, if the ONU port corresponding to an ONU that goes online is created before the update command 
is used, the ONU will be updated directly (if it matches the update files); otherwise, the ONU will not be 
updated. 
 
Restarting an ONU 
Follow these steps to restart an ONU: 
To do... 
Use the command... 
Remarks 
Enter system view 
system-view
 
— 
Enter ONU port view 
interface
 onu 
interface-number
 
— 
Restart the ONU 
reboot onu
 
Required 
 
Displaying and Maintaining ONU Port Configuration 
To do... 
Use the command... 
Remarks 
Display the global information 
about the ONU 
display vendor-specific 
information
 
Display the IP address 
allocation information when the 
ONU serves as a DHCP client  
display dhcp-client
 
Display the information about 
the protocols supported by the 
ONU 
display onu-protocol
 [ stp | 
igmp-snooping
 | 
dhcp-snooping information
 ]
Display multicast control 
information 
display epon-multicast 
information 
Available in ONU port view 
To display the information of an 
ONU, make sure the ONU is 
online.  
Clear the statistics information 
about the packets on an ONU 
port 
reset counters interface
 
interface-type interface-number
Available in user view 
 
Configuration Examples for ONU Remote Management 
Configuration Example for Binding an ONU Port to an ONU 
Network requirements 
Bind ONU 3/0/1:1 to ONU 1, whose MAC address is 000f-e200-0031, and ONU 3/0/1:2 to ONU 2, 
whose MAC address is 000f-e200-3749. ONU 1 and ONU 2 have the same extended OAM version of 2.