3com S7906E Manuel De Montage
3-19
Network diagram
Figure 3-1
Network diagram for ONU port-to-ONU binding configuration
ONU1
OLT
OLT3/0/1
POS
ONU2
Configuration procedure
# Configure the OUI and extended OAM version number list.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ftth
[Sysname-ftth] epon-parameter ouilist oui 000fe2 oam-version 2 slot 3
[Sysname-ftth] quit
# Create ONU ports ONU 3/0/1:1 and ONU 3/0/1:2. Bind ONU 3/0/1:1 to the ONU 1 and ONU 3/0/1:2 to
ONU 2.
ONU 2.
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] using onu 1 to 2
[Sysname-Olt3/0/1] quit
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] bind onuid 000f-e200-0031
[Sysname-Onu3/0/1:1] quit
[Sysname] interface onu 3/0/1:2
[Sysname-Onu3/0/1:2] bind onuid 000f-e200-3749
# When the two ONUs are up, display the binding information of the ONUs.
<Sysname> display onuinfo interface Olt 3/0/1
ONU Mac Address LLID Dist(M) Port Board/Ver Sft/Epm State Aging
000f-e200-0031 1 <50 Onu3/0/1:1 ET704-A-L/B 110/100 Up N/A
000f-e200-3749 2 <50 Onu3/0/1:2 ET704-A-L/B 110/100 Up N/A
--- 2 entries found ---
ONU RSTP Configuration Example
Network requirements
A user PC is attached to UNI 1. If UNI 2 and UNI 3 are interconnected by mistake while RSTP is
disabled on the ONU, broadcast storm will occur between UNI 2 and UNI 3 when the user pings an
IP address for which no ARP entry exists on the PC.
disabled on the ONU, broadcast storm will occur between UNI 2 and UNI 3 when the user pings an
IP address for which no ARP entry exists on the PC.