3com S7906E Manuel De Montage

Page de 2621
 
2-2 
 
DHCP Address Pool 
Address pool types 
DHCP address pools can be classified into two types: 
Common address pool: Supports both static binding and dynamic allocation. 
Extended address pool: Supports dynamic allocation only. 
Common address pool structure 
In response to a client’s request, the DHCP server selects an idle IP address from an address pool and 
sends it together with other parameters such as the lease time and a DNS server address to the client. 
The common address pool database is organized as a tree. The root of the tree is the address pool for 
natural networks, branches are address pools for subnets, and leaves are addresses statically bound to 
clients. For the same level address pools, a previously configured pool has a higher selection priority 
than a new one.  
At the very beginning, subnetworks inherit network parameters and clients inherit subnetwork 
parameters. Therefore, common parameters, for example a DNS server address, should be configured 
at the highest (network or subnetwork) level of the tree.  
After establishment of the inheritance relationship, the new configuration at the higher level (father) of 
the tree will be: 
Inherited if the lower level (child) has no such configuration, or  
Overridden if the lower level (child) has such configuration. 
 
 
The extended address pool database is not organized as a tree. 
The IP address lease does not enjoy the inheritance attribute. 
 
Principles for selecting an address pool 
The DHCP server observes the following principles to select an address pool when assigning an IP 
address to a client: 
1)  If the receiving interface has an extended address pool referenced, the DHCP server will assign an 
IP address from this address pool. If no IP address is available in the address pool, the DHCP 
server will fail to assign an address to the client. For the configuration of such an address pool, 
refer to section 
2)  If there is an address pool where an IP address is statically bound to the MAC address or ID of the 
client, the DHCP server will select this address pool and assign the statically bound IP address to 
the client. For the configuration of this address pool, refer to section 
3)  Otherwise, the DHCP server will select the smallest common address pool that contains the IP 
address of the receiving interface (if the client and the server reside on the same network segment), 
or the smallest common address pool that contains the IP address specified in the giaddr field of