3com S7906E Manuel De Montage
3-7
Follow these steps to configure the DHCP relay agent in system view to send a DHCP-RELEASE
request:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure the DHCP relay agent to send a
DHCP-RELEASE request
DHCP-RELEASE request
dhcp relay release ip client-ip
Required
Configuring the DHCP Relay Agent to Support Option 82
Prerequisites
You need to complete the following tasks before configuring the DHCP relay agent to support Option 82.
z
Enabling DHCP
z
Enabling the DHCP relay agent on the specified interface
z
Correlating a DHCP server group with relay agent interfaces
Configuring the DHCP relay agent to support Option 82
Follow these steps to configure the DHCP relay agent to support Option 82:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter interface view
interface interface-type
interface-number
interface-number
—
Enable the relay agent to support
Option 82
Option 82
dhcp relay information
enable
enable
Required
Disabled by default.
Configure the handling strategy for
requesting messages containing
Option 82
requesting messages containing
Option 82
dhcp relay information
strategy { drop | keep |
replace }
strategy { drop | keep |
replace }
Optional
replace by default.
Configure the
padding format for
Option 82
padding format for
Option 82
dhcp relay information
format { normal | verbose
[ node-identifier { mac |
sysname | user-defined
node-identifier } ] }
format { normal | verbose
[ node-identifier { mac |
sysname | user-defined
node-identifier } ] }
Optional
normal by default.
Configure the
code type for the
circuit ID
sub-option
code type for the
circuit ID
sub-option
dhcp relay information
circuit-id format-type
{ ascii | hex }
circuit-id format-type
{ ascii | hex }
Optional
By default, the code type
depends on the padding
format of Option 82. Each
field has its own code type.
depends on the padding
format of Option 82. Each
field has its own code type.
The code type configuration
applies to non-user-defined
Option 82 only.
applies to non-user-defined
Option 82 only.
Configure
non-user-defined
Option 82
non-user-defined
Option 82
Configure the
code type for the
remote ID
sub-option
code type for the
remote ID
sub-option
dhcp relay information
remote-id format-type
{ ascii | hex }
remote-id format-type
{ ascii | hex }
Optional
By default, the code type is
hex.
hex.
This code type configuration
applies to non-user-defined
Option 82 only.
applies to non-user-defined
Option 82 only.