3com S7906E Manuel De Montage

Page de 2621
 
2-4 
Dynamic domain name resolution and the domain name suffix are configured on the Switch that serves 
as a DNS client, and thus the Switch can use domain name host to access the host with the domain 
name host.com and the IPv6 address 1::1/64. 
Figure 2-2 Network diagram of dynamic domain name resolution 
 
 
 
Configuration procedure 
 
 
Before performing the following configuration, make sure that the Switch and the host are 
accessible to each another via available routes, and the IPv6 addresses of the interfaces are 
configured as shown 
This configuration may vary with different DNS servers. The following configuration is performed on 
a PC running Windows server 2003. Make sure that the DNS server supports the IPv6 DNS 
function so that the server can process IPv6 DNS packets, and the interfaces of the DNS server 
can forward IPv6 packets. 
 
1)  Configure the DNS server 
# Enter the DNS server configuration page. 
Select Start > Programs > Administrative Tools > DNS
# Create zone com.