Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Manuel De Montage

3com S7906E Manuel De Montage

Télécharger
Page de 2621
 
1-27 
    4 packets input,  256 bytes 
    0 input error 
    12 packets output,  768 bytes 
    0 output error 
 
<SwitchB> display interface tunnel 2 
Tunnel2 current state: UP 
Line protocol current state: UP 
Description: Tunnel2 Interface 
The Maximum Transmit Unit is 1480 
Internet Address is 10.1.2.2/24 Primary 
Encapsulation is TUNNEL, service-loopback-group ID is 1. 
Tunnel source 3.1.1.1, destination 2.1.1.1 
Tunnel protocol/transport IP/IP 
Last clearing of counters:  Never 
    Last 300 seconds input:  0 bytes/sec, 0 packets/sec 
    Last 300 seconds output:  0 bytes/sec, 0 packets/sec 
    5 packets input,  320 bytes 
    0 input error 
    9 packets output,  576 bytes 
    0 output error 
# Ping the IPv4 address of the peer interface VLAN-interface 100 from Switch A. 
[SwitchA] ping 10.1.3.1 
  PING 10.1.3.1: 56  data bytes, press CTRL_C to break 
    Reply from 10.1.3.1: bytes=56 Sequence=1 ttl=255 time=15 ms 
    Reply from 10.1.3.1: bytes=56 Sequence=2 ttl=255 time=15 ms 
    Reply from 10.1.3.1: bytes=56 Sequence=3 ttl=255 time=16 ms 
    Reply from 10.1.3.1: bytes=56 Sequence=4 ttl=255 time=16 ms 
    Reply from 10.1.3.1: bytes=56 Sequence=5 ttl=255 time=15 ms 
 
  --- 10.1.3.1 ping statistics --- 
    5 packet(s) transmitted 
    5 packet(s) received 
    0.00% packet loss 
    round-trip min/avg/max = 15/15/16 ms 
Configuring an IPv4 over IPv6 Tunnel 
 
 
EB boards and SD boards support only the IPv4 over IPv6 Tunnel.