3com S7906E Manuel De Montage

 

1-13 

z 

As shown in 

, use Device as an FTP server, and the PC as the FTP client. Their IP 

addresses are 1.2.1.1/16 and 1.1.1.1/16 respectively. An available route exists between Device 

and PC. 

z 

PC keeps the updated startup file of the device. Use FTP to upgrade the device and back up the 

configuration file. 

z 

Set the username to ftp and the password to pwd for the FTP client to log in to the FTP server. 

Figure 1-4 Upgrading using the FTP server 

 

 

1)  Configure Device (FTP Server) 

# Create an FTP user account ftp, set its password to pwd and the user privilege level to level 3 (the 

manage level). Authorize ftp’s access to the root directory of the flash on the AMB, and specify ftp to 

use FTP. 

<Sysname> system-view 

[Sysname] local-user ftp 

[Sysname-luser-ftp] password simple pwd 

[Sysname-luser-ftp] authorization-attribute level 3 

[Sysname-luser-ftp] authorization-attribute work-directory flash:/ 

# To access the flash root directory of the SMB (in slot 1), execute this command: 

[Sysname-luser-ftp] authorization-attribute work-directory slot1#flash:/ 

[Sysname-luser-ftp] service-type ftp 

[Sysname-luser-ftp] quit 

# Enable FTP server. 

[Sysname] ftp server enable 

[Sysname] quit 

# Check files on your device. Remove those redundant to ensure adequate space for the startup file to 

be uploaded. 

<Sysname> dir 

Directory of flash:/ 

 

   0   drw-         -  Dec 07 2005 10:00:57   filename 

   1   drw-         -  Jan 02 2006 14:27:51   logfile 

   2   -rw-      1216  Jan 02 2006 14:28:59   config.cfg 

   3   -rw-      1216  Jan 02 2006 16:27:26   back.cfg 

 

64389 KB total (2511 KB free)