3com S7906E Manuel De Montage

 

2-3 

z 

If you use the tftp client source command and the tftp command to specify a source address 

respectively, the source address configured with the tftp command is used to communicate with a 

TFTP server. 

The source address specified with the tftp client source command is valid for all TFTP connections 

and the source address specified with the tftp command is valid only for the current tftp connection. 

Follow these steps to configure the TFTP client: 

Enter system view 

— 

Use an ACL to control the 
device’s access to TFTP 
servers 

tftp-server [ ipv6 ] acl 
acl-number 

Optional 

By default, no ACL is used to 
control the device’s access to 
TFTP servers. 

Configure the source address 
of the TFTP client 

tftp client source { interface 
interface-type interface-number 
| ip source-ip-address } 

Optional 

A device uses the source 
address determined by the 
matched route to communicate 
with the TFTP server by 
default. 

Return to user view 

— 

Download or upload a file in an 
IPv4 network 

tftp server-address { get | put | 
sget } source-filename 
[ destination-filename ] 
[ source { interface 
interface-type interface-number 
| ip source-ip-address } ] 

Optional 

Available in user view 

Download or upload a file in an 
IPv6 network 

tftp ipv6 tftp-ipv6-server [ -i 
interface-type 
interface-number ] { get | put } 
source-file [ destination-file ] 

Optional 

Available in user view 

 

z 

If no primary IP address is configured on the source interface, no TFTP connection can be 

established. 

z 

If you use the ftp client source command to first configure the source interface and then the 

source IP address of the packets of the TFTP client, the new source IP address will overwrite the 

current one, and vice versa. 

 

Display the configuration of the 
TFTP client 

Available in any view