3com S7906E Manuel De Montage

 

1-10 

Configuring the Description of an Aggregate Interface 

Follow these steps to configure the description of an aggregate interface: 

Enter system view 

— 

Enter aggregate interface view 

interface bridge-aggregation 
interface-number 

— 

Configure the description of the 
aggregate interface 

description text 

Optional 

By default, the description of an 
interface is interface-name 
Interface, such as 
Bridge-Aggregation1 
Interface.  

 

To enable an aggregate interface to generate linkUp/linkDown trap messages when the state of the 

interface changes, you should enable linkUp/linkDown trap generation on the aggregate interface.  

Follow these steps to enable linkUp/linkDown trap generation for an aggregate interface: 

Enter system view 

— 

Enable the trap function 
globally 

snmp-agent trap enable 
[ standard [ linkdown | 
linkup ] * ] 

Optional 

By default, linkUp/linkDown 
trap generation is enabled 
globally and on all interfaces.  

Enter aggregate interface view 

interface bridge-aggregation 
interface-number 

— 

Enable linkUp/linkDown trap 
generation for the aggregate 
interface 

Optional 

Enabled by default 

 

Shutting down or bringing up an aggregate interface affects the selected state of the ports in the 

corresponding aggregation group. When an aggregate interface is shut down, all selected ports in its 

aggregation group become unselected; when the aggregate interface is brought up, the selected state 

of the ports in the corresponding aggregation group is re-calculated.  

Follow these steps to shut down an aggregate interface: 

Enter system view 

— 

Enter aggregate interface view 

interface bridge-aggregation 
interface-number 

—