3com S7906E Manuel De Montage
1-32
Follow these steps to configure Type-3 LSA filtering on an ABR:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id | router-id router-id |
vpn-instance instance-name ] *
vpn-instance instance-name ] *
—
Enter area view
area area-id
—
Configure ABR Type-3 LSA
filtering
filtering
filter { acl-number | ip-prefix
ip-prefix-name } { import | export }
ip-prefix-name } { import | export }
Required
Not configured by
default.
default.
Configuring an OSPF Cost for an Interface
You can configure an OSPF cost for an interface with one of the following two methods:
z
Configure the cost value in interface view.
z
Configure a bandwidth reference value for the interface, and OSPF computes the cost
automatically based on the bandwidth reference value: Interface OSPF cost= Bandwidth reference
value/Interface bandwidth. If the calculated cost is greater than 65535, the value of 65535 is used;
if the calculated cost is less than 1, the value of 1 is used.
If no cost is configured for an interface, OSPF computes the interface cost automatically.
Follow these steps to configure an OSPF cost for an interface:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter interface view
interface interface-type
interface-number
interface-number
—
Configure an OSPF cost
for the interface
for the interface
ospf cost value
Optional
By default, an interface computes its
cost according to the bandwidth.
cost according to the bandwidth.
The cost value defaults to 0 on
loopback interfaces.
loopback interfaces.
Follow these steps to configure a bandwidth reference value:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [ process-id | router-id router-id |
vpn-instance instance-name ] *
vpn-instance instance-name ] *
—
Configure a bandwidth
reference value
reference value
bandwidth-reference value
Optional
The value defaults to
100 Mbps.
100 Mbps.