3com S7906E Manuel De Montage

 

1-44 

With this feature enabled, the OSPF router can receive and advertise Type 9, Type 10 and Type 11 

opaque LSAs. 

Follow these steps to enable the advertisement and reception of opaque LSAs: 

Enter system view 

— 

Enter OSPF view 

ospf [ process-id | router-id router-id | 
vpn-instance instance-name ] * 

— 

Enable the advertisement and 
reception of opaque LSAs 

opaque-capability enable 

Optional 

Disabled by default 

 

To ensure OSPF runs normally, a router receives and processes Hello packets and other protocol 

packets at the same time. When the router has established neighbor relationships with multiple 

neighboring routers and the routing table size is big, the router will need to receive and process large 

numbers of packets. Configuring OSPF to give priority to receiving and processing Hello packets helps 

ensure stable neighbor relationships. 

Follow these steps to configure OSPF to give priority to receiving and processing Hello packets: 

Enter system view 

— 

Configure OSPF to 
give priority to 
receiving and 
processing Hello 
packets 

Required 

Not configured by default. 

 

Sending large numbers of LSU packets for LSDB synchronization with neighbors may affect router 

performance and consume large network bandwidths. Therefore, you can configure the router to send 

LSU packets at a proper interval and limit the maximum number of LSU packets sent out an OSPF 

interface each time.  

Follow these steps to configure the LSU transmit rate: 

Enter system view 

— 

Enter OSPF view 

ospf [ process-id | router-id router-id | 
vpn-instance instance-name ] * 

—