3com S7906E Manuel De Montage

Page de 2621
 
1-57 
Figure 1-24 Network diagram for OSPF Stub area configuration 
 
 
Configuration procedure 
1)  Configure IP addresses for interfaces (omitted). 
2)  Configure OSPF basic functions (refer to 
3)  Configure Switch D to redistribute static routes. 
[SwitchD] ip route-static 3.1.2.1 24 10.5.1.2 
[SwitchD] ospf 
[SwitchD-ospf-1] import-route static 
[SwitchD-ospf-1] quit 
# Display ABR/ASBR information on Switch C. 
[SwitchC] display ospf abr-asbr 
 
          OSPF Process 1 with Router ID 10.4.1.1 
                  Routing Table to ABR and ASBR 
 
 Type        Destination     Area            Cost  Nexthop         RtType 
 Intra       10.2.1.1        0.0.0.1         3     10.2.1.1        ABR 
 Inter       10.3.1.1        0.0.0.1         5     10.2.1.1        ABR 
 Inter       10.5.1.1        0.0.0.1         7     10.2.1.1        ASBR 
# Display OSPF routing table information on Switch C. 
[SwitchC] display ospf routing 
 
          OSPF Process 1 with Router ID 10.4.1.1 
                   Routing Tables 
 
 Routing for Network 
 Destination        Cost     Type    NextHop         AdvRouter       Area 
 10.2.1.0/24        3        Transit 10.2.1.2        10.2.1.1        0.0.0.1 
 10.3.1.0/24        7        Inter   10.2.1.1        10.2.1.1        0.0.0.1 
 10.4.1.0/24        3        Stub    10.4.1.1        10.4.1.1        0.0.0.1 
 10.5.1.0/24        17       Inter   10.2.1.1        10.2.1.1        0.0.0.1 
 10.1.1.0/24        5        Inter   10.2.1.1        10.2.1.1        0.0.0.1 
 
 Routing for ASEs