Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Manuel De Montage

3com S7906E Manuel De Montage

Télécharger
Page de 2621
 
1-64 
 
          OSPF Process 1 with Router ID 4.4.4.4 
                  Neighbors 
 
 Area 0.0.0.0 interface 192.168.1.4(Vlan-interface1)'s neighbors 
 Router ID: 1.1.1.1      Address: 192.168.1.1      GR State: Normal 
   State: Full  Mode:Nbr is  Slave  Priority: 100 
   DR: 192.168.1.4  BDR: 192.168.1.3  MTU: 0 
   Dead timer due in 31  sec 
   Neighbor is up for 00:11:17 
   Authentication Sequence: [ 0 ] 
 
 Router ID: 2.2.2.2      Address: 192.168.1.2      GR State: Normal 
   State: Full  Mode:Nbr is  Slave  Priority: 0 
   DR: 192.168.1.4  BDR: 192.168.1.3  MTU: 0 
   Dead timer due in 35  sec 
   Neighbor is up for 00:11:19 
   Authentication Sequence: [ 0 ] 
 
 Router ID: 3.3.3.3      Address: 192.168.1.3      GR State: Normal 
   State: Full  Mode:Nbr is  Slave  Priority: 2 
   DR: 192.168.1.4  BDR: 192.168.1.3  MTU: 0 
   Dead timer due in 33  sec 
   Neighbor is up for 00:11:15 
   Authentication Sequence: [ 0 ] 
The DR and BDR have no change. 
 
  
In the above output, you can find the priority configuration does not take effect immediately. 
 
4)  Restart OSPF process (omitted) 
# Restart the OSPF process of Switch D.  
<SwitchD> reset ospf 1 process 
Warning : Reset OSPF process? [Y/N]:y 
# Display neighbor information on Switch D. 
<SwitchD> display ospf peer verbose 
 
          OSPF Process 1 with Router ID 4.4.4.4 
                  Neighbors 
 
 Area 0.0.0.0 interface 192.168.1.4(Vlan-interface1)'s neighbors 
 Router ID: 1.1.1.1          Address: 192.168.1.1      GR State: Normal 
   State: Full  Mode: Nbr is Slave  Priority: 100