3com S7906E Manuel De Montage
1-21
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enable route redistribution from
a routing protocol into BGP
a routing protocol into BGP
import-route protocol
[ process-id | all-processes ]
[ med med-value |
route-policy
route-policy-name ] *
[ process-id | all-processes ]
[ med med-value |
route-policy
route-policy-name ] *
Required
Not enabled by default
Enabling Default Route Redistribution into BGP
Using the import-route command cannot redistribute a default route. To do so, complete the following
configuration.
Follow these steps to enable default route redistribution into BGP:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enable route redistribution from
a routing protocol into BGP
a routing protocol into BGP
import-route protocol
[ process-id | all-processes ]
[ med med-value |
route-policy
route-policy-name ] *
[ process-id | all-processes ]
[ med med-value |
route-policy
route-policy-name ] *
Required
Not redistributed by default
Enable default route
redistribution into BGP
redistribution into BGP
default-route imported
Optional
Not enabled by default
Controlling Route Distribution and Reception
Prerequisites
BGP connections have been created.
Configuring BGP Route Summarization
To reduce the routing table size on medium and large BGP networks, you need to configure route
summarization on BGP routers. BGP supports two summarization modes: automatic and manual.
Manual summary routes enjoy a higher priority than automatic ones.
Configure automatic route summarization
After automatic route summarization is configured, BGP summarizes redistributed IGP subnets to
advertise only natural networks. Routes injected with the network command can not be summarized.
Follow these steps to configure automatic route summarization:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—