3com S7906E Guide De Référence

 

1-4 

If no level is specified, the default route belongs to Level-2.  

 

Use the ipv6 default-route-advertise command to generate a Level-1 or Level-2 IPv6 IS-IS default 

route.  

Use the undo ipv6 default-route-advertise command to disable generating a default route.  

No IPv6 IS-IS default route is generated by default.  

With a routing policy, you can configure IPv6 IS-IS to generate the default route that must match the 

routing policy. You can use the apply isis level-1 command in routing policy view to generate a default 

route in L1 LSPs, or use the apply isis level-2 command in routing policy view to generate a default 

route in L2 LSPs, and use the apply isis level-1-2 in routing policy view to generate a default route in 

L1 and L2 LSPs respectively.  

Refer to Routing Policy Commands in the IP Routing Volume for information about the apply isis 

command.  

# Configure the router to generate a default route in Level-2 LSPs.  

<Sysname> system-view 

[Sysname] isis 

[Sysname-isis-1] ipv6 default-route-advertise 

ipv6 enable 

undo ipv6 enable 

IS-IS view 

2: System level 

None 

Use the ipv6 enable command to enable IPv6 for the IPv6 IS-IS process.  

Use the undo ipv6 enable command to disable IPv6.  

IPv6 is disabled by default.