3com S7906E Guide De Référence
1-11
Field
Description
Path
AS_PATH attribute of the path, recording the ASs it has passed, for avoiding routing
loops
loops
Origin attribute of the route, which can take on one of the following values:
i
Indicates the route is interior to the AS.
Summary routes and routes defined using the network command are
considered IGP routes.
considered IGP routes.
e
Indicates that a route is learned from the exterior gateway protocol (EGP).
Origin
?
Short for INCOMPLETE. It indicates that the origin of a route is unknown and
the route is learned by other means. BGP sets Origin attribute of routes
learned from other IGP protocols to INCOMPLETE.
the route is learned by other means. BGP sets Origin attribute of routes
learned from other IGP protocols to INCOMPLETE.
display bgp ipv6 peer
Syntax
display bgp ipv6 peer [ group-name log-info | ipv4-address verbose | ipv6-address { log-info |
verbose } | verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: Specifies the IPv6 address of a peer to be displayed.
log-info: Displays log information of the specified peer.
verbose: Displays the detailed information of the peer.
Description
Use the display bgp ipv6 peer command to display peer/peer group information.
If no parameter specified, information about all peers and peer groups is displayed.
Examples
# Display all IPv6 peer information.
<Sysname> display bgp ipv6 peer
BGP Local router ID : 20.0.0.1
local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer V AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State