Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-27 
Use the undo peer advertise-community command to remove the configuration. 
By default, no community attribute is advertised to any peer group/peer. 
Examples 
# Advertise the community attribute to the peer 1:2::3:4. 
<Sysname> system-view 
[Sysname] bgp 100 
[Sysname-bgp] ipv6-family 
[Sysname-bgp-af-ipv6] peer 1:2::3:4 advertise-community 
peer advertise-ext-community (IPv6 address family view) 
Syntax 
peer { group-name | ipv4-address | ipv6-address } advertise-ext-community 
undo peer { group-name | ipv4-address | ipv6-address } advertise-ext-community 
View 
IPv6 address family view 
Default Level 
2: System level 
Parameters 
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters. 
ipv4-address: IPv4 address of a peer. 
ipv6-address: IPv6 address of a peer. 
Description 
Use the peer advertise-ext-community command to advertise the extended community attribute to a 
peer/peer group.  
Use the undo peer advertise-ext-community command to remove the configuration.  
By default, no extended community attribute is advertised to a peer/peer group.  
Examples 
# Advertise the extended community attribute to the peer 1:2::3:4. 
<Sysname> system-view 
[Sysname] bgp 100 
[Sysname-bgp] ipv6-family 
[Sysname-bgp-af-ipv6] peer 1:2::3:4 advertise-ext-community 
peer allow-as-loop (IPv6 address family view) 
Syntax 
peer { group-name | ipv4-address | ipv6-address } allow-as-loop [ number ] 
undo peer { group-name | ipv4-address | ipv6-address } allow-as-loop