3com S7906E Guide De Référence

 

1-31 

ipv6-group-name: Name of a peer group, a string of 1 to 47 characters. 

ipv6-address: IPv6 address of a peer. 

interface-type interface-number: Specifies the type and name of the interface. 

Use the peer connect-interface command to specify the source interface for establishing TCP 

connections to an IPv6 BGP peer or peer group.  

Use the undo peer connect-interface command to restore the default. 

By default, BGP uses the outbound interface of the best route to the IPv6 BGP peer/peer group as the 

source interface for establishing a TCP connection. 

Note that: 

To establish multiple BGP connections to a BGP router, you need to specify on the local router the 

respective source interfaces for establishing TCP connections to the peers on the peering BGP router; 

otherwise, the local BGP router may fail to establish TCP connections to the peers when using the 

outbound interfaces of the best routes as the source interfaces. 

# Specify loopback 0 as the source interface for routing updates to peer 1:2::3:4. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv6-family 

[Sysname-bgp-af-ipv6] peer 1:2::3:4 connect-interface loopback 0 

peer { group-name  | ipv4-address | ipv6-address }  default-route-advertise  [  route-policy 

route-policy-name ] 

undo peer { group-name | ipv4-address | ipv6-address } default-route-advertise 

IPv6 address family view 

2: System level 

group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters. 

ipv4-address: IPv4 address of a peer. 

ipv6-address: IPv6 address of a peer. 

route-policy-name: Route-policy name, a string of 1 to 19 characters.