3com S7906E Guide De Référence

 

1-41 

[Sysname-bgp-af-ipv6] peer 1:2::3:4 public-as-only 

peer { group-name | ipv4-address | ipv6-address } reflect-client 

undo peer { group-name | ipv4-address | ipv6-address } reflect-client 

IPv6 address family view 

2: System level 

group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters. 

ipv4-address: IPv4 address of a peer. 

ipv6-address: IPv6 address of a peer. 

Use the peer reflect-client command to configure the router as a route reflector and specify a 

peer/peer group as a client. 

Use the undo peer reflect-client command to remove the configuration. 

By default, neither route reflector nor client is configured. 

Related commands: reflect between-clients, reflector cluster-id. 

# Configure the local device as a route reflector and specify the peer group test as a client. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv6-family 

[Sysname-bgp-af-ipv6] group test 

[Sysname-bgp-af-ipv6] peer test reflect-client 

peer { group-name | ipv4-address | ipv6-address } route-limit prefix-number [ { alert-only | reconnect 

reconnect-time } | percentage ] * 

undo peer { group-name | ipv4-address | ipv6-address } route-limit 

IPv6 address family view 

2: System level