3com S7906E Guide De Référence

 

1-44 

interval: Specifies the minimum interval for sending the same update to a peer (group) from 5 to 600 

seconds. 

Use the peer route-update-interval command to specify the interval for sending the same update to a 

peer/peer group.  

Use the undo peer route-update-interval command to restore the default. 

By default, the interval is 15 seconds for the IBGP peer, and 30 seconds for the EBGP peer. 

# Specify the interval for sending the same update to the peer 1:2::3:4 as 10 seconds. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv6-family 

[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100 

[Sysname-bgp-af-ipv6] peer 1:2::3:4 route-update-interval 10 

peer { ipv6-group-name | ipv6-address } substitute-as 

undo peer { ipv6-group-name | ipv6-address } substitute-as 

IPv6 address family view 

2: System level 

ipv6-group-name: Name of a peer group, a string of 1 to 47 characters. 

ipv6-address: IPv6 address of a peer. 

Use the peer substitute-as command to substitute the local AS number for the AS number of a 

peer/peer group in the AS_PATH attribute. 

Use the undo peer substitute-as command to remove the configuration. 

The substitution is not configured by default. 

# Substitute the local AS number for the AS number of peer 1:2::3:4. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv6-family 

[Sysname-bgp-af-ipv6] peer 1:2::3:4 substitute-as