3com S7906E Guide De Référence

 

1-46 

IPv6 address family view 

2: System level 

external-preference: Preference of EBGP route learned from an EBGP peer, in the range 1 to 255.  

internal-preference: Preference of IBGP route learned from an IBGP peer, in the range 1 to 255.  

local-preference: Preference of IPv6 BGP local route, in the range 1 to 255. 

route-policy-name: Routing policy name, a string of 1 to 19 characters. The routing policy can set a 

preference for routes passing it. The default value applies to the routes filtered out. 

Use the preference command to configure preferences for EBGP, IBGP, and local routes.  

Use the undo preference command to restore the default. 

The bigger the preference value is, the lower the preference is. The default values of 

external-preference, internal-preference and local-preference are 255, 255 and 130 respectively. 

# Configure preferences for EBGP, IBGP, and local routes as 20, 20 and 200. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv6-family 

[Sysname-bgp-af-ipv6] preference 20 20 200 

reflect between-clients 

undo reflect between-clients 

IPv6 address family view 

2: System level 

None 

Use the reflect between-clients command to enable route reflection between clients.  

Use the undo reflect between-clients command to disable this function. 

By default, route reflection between clients is enabled.