3com S7906E Guide De Référence

Page de 2327
 
1-1 
1  
Route Policy Configuration Commands 
 
 
The term “router” in this document refers to a router in a generic sense or a Layer 3 switch. 
The common configuration commands of route policy are applicable to both IPv4 and IPv6. 
EA boards (such as LSQ1GP12EA and LSQ1TGX1EA) do not support IPv6 features. 
 
Common Route Policy Configuration Commands 
apply as-path 
Syntax 
apply as-path as-number&<1-10> replace ] 
undo apply as-path 
View 
Route policy view 
Default Level 
2: System level 
Parameters 
as-number: Autonomous system number, in the range of 1 to 65535. 
&<1-10>: Indicates you can enter up to 10 AS numbers. 
replace: Replaces the original AS numbers. 
Description 
Use the apply as-path command to apply the specified AS numbers to BGP routes. 
Use the undo apply as-path command to remove the clause configuration. 
No AS_PATH attribute is set by default. 
With the replace keyword included, the apply as-path command replaces the original AS_PATH 
attribute with the specified AS numbers. Without the replace keyword, this command adds the specified 
AS numbers before the original AS_PATH attribute. 
Examples 
# Configure node 10 in permit mode of route policy policy1: add AS number 200 before the original 
AS_PATH attribute of BGP routing information matching AS-PATH list 1.