3com S7906E Guide De Référence
1-4
Parameters
+: Increases a cost value.
+: Decreases a cost value.
cost: Cost in the range 0 to 4294967295.
Description
Use the apply cost command to set a cost for routing information.
Use the undo apply cost command to remove the clause configuration.
No cost is set for routing information by default.
Related commands: if-match interface, if-match acl, if-match ip-prefix, if-match ip next-hop,
if-match cost, if-match tag, route-policy, apply ip-address next-hop, apply local-preference,
apply origin, apply tag.
Examples
# Create routing policy policy1 with node 10, matching mode as permit. If a route matches the
outbound interface VLAN-interface 10, set the cost for the route to 120.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match interface vlan-interface 10
[Sysname-route-policy] apply cost 120
apply cost-type
Syntax
apply cost-type { external | internal | type-1 | type-2 }
undo apply cost-type
View
Route policy view
Default Level
2: System level
Parameters
external: IS-IS external route.
internal: IS-IS internal route.
type-1: Type-1 external route of OSPF.
type-2: Type-2 external route of OSPF.
Description
Use the apply cost-type command to set a cost type for routing information.
Use the undo apply cost-type command to remove the clause configuration.
No cost type is set for routing information by default.