3com S7906E Guide De Référence
1-6
apply isis
Syntax
apply isis { level-1 | level-1-2 | level-2 }
undo apply isis
View
Route policy view
Default Level
2: System level
Parameters
level-1: Redistributes routes into IS-IS level-1.
level-2: Redistributes routes into IS-IS level-2.
level-1-2: Redistributes routes into both IS-IS level-1 and level-2.
Description
Use the apply isis command to redistribute routes into a specified ISIS level.
Use the undo apply isis command to remove the clause configuration.
No IS-IS level is set by default.
Related commands: if-match interface, if-match acl, if-match ip-prefix, if-match ip next-hop,
if-match cost, if-match tag, route-policy, apply cost, apply origin, apply tag.
Examples
# Configure node 10 in permit mode of route policy policy1: If a route has a tag of 8, redistribute the
route to IS-IS level-2.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match tag 8
[Sysname-route-policy] apply isis level-2
apply local-preference
Syntax
apply local-preference preference
undo apply local-preference
View
Route policy view
Default Level
2: System level