3com S7906E Guide De Référence

 

1-15 

cost: Cost in the range 0 to 4294967295.  

Use the if-match cost command to match routing information having the specified cost.  

Use the undo if-match cost command to remove the match criterion.  

The match criterion is not configured by default.  

Related commands: if-match interface,  if-match acl,  if-match ip-prefix,  if-match ip next-hop, 

if-match tag, route-policy, apply ip-address next-hop, apply cost, apply local-preference, apply 

origin, apply tag.  

# Configure node 10 in permit mode of route policy policy1: define an if-match clause to permit routing 

information with a cost of 8.  

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10 

[Sysname-route-policy] if-match cost 8 

if-match extcommunity ext-comm-list-number&<1-16> 

undo if-match extcommunity [ ext-comm-list-number&<1-16> ] 

Route policy view 

2: System level 

ext-comm-list-number: Extended community list number, in the range of 1 to 199.  

&<1-16>: Indicates the argument before it can be entered up to 16 times. 

Use the if-match extcommunity command to specify extended community list(s) for matching against 

the extended community attribute of BGP routing information. 

Use the undo if-match extcommunity command to remove the match criterion.  

The match criterion is not configured by default.  

# Configure node 10 in permit mode of route policy policy1 to match BGP routing information to 

extended community lists 100 and 150. 

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10