3com S7906E Guide De Référence

 

1-18 

# Configure node 10 in permit mode of route policy policy1 to match OSPF internal routes. 

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10 

[Sysname-route-policy] if-match route-type internal 

if-match tag value 

undo if-match tag 

Route policy view 

2: System level 

value: Specifies a tag from 0 to 4294967295.  

Use the if-match tag command to match routing information having the specified tag.  

Use the undo if-match tag command to remove the match criterion.  

The match criterion is not configured by default.  

Related commands: if-match interface,  if-match acl,  if-match ip-prefix,  if-match ip next-hop, 

if-match cost, route-policy, apply ip-address next-hop, apply cost, apply local-preference, apply 

origin, apply tag.  

# Configure node 10 in permit mode of route policy policy1 to permit RIP, OSPF and IS-IS routing 

information with a tag of 8.  

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10 

[Sysname-route-policy] if-match tag 8 

ip as-path as-path-number { deny | permit } regular-expression 

undo ip as-path as-path-number 

System view