3com S7906E Guide De Référence

 

1-24 

undo if-match acl 

Route policy view 

2: System level 

acl-number: ACL number from 2000 to 3999.  

Use the if-match acl command to configure an ACL match criterion. 

Use the undo if-match acl command to remove the match criterion.  

No ACL match criterion is configured by default.  

Related commands: if-match interface,  if-match ip next-hop,  if-match cost,  if-match tag, 

route-policy, apply ip-address next-hop, apply cost, apply local-preference, apply origin, apply 

tag. 

# Configure node 10 of route policy policy1 to permit routes matching ACL 2000. 

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10 

[Sysname-route-policy] if-match acl 2000 

if-match ip { next-hop | route-source } { acl acl-number | ip-prefix ip-prefix-name } 

undo if-match ip { next-hop | route-source } [ acl | ip-prefix ] 

Route policy view 

2: System level 

next-hop: Matches the next hop of routing information to the filter.  

route-source: Matches the source address of routing information to the filter.  

acl acl-number: Matches an ACL with a number from 2000 to 2999.  

ip-prefix ip-prefix-name: Matches an IP prefix list with a name being a string of 1 to 19 characters.  

Use the if-match ip command to configure a next hop or source address match criterion for IPv4 

routes.