3com S7906E Guide De Référence

 

1-29 

ge  

greater-equal, the lower prefix length 

Le 

less-equal, the upper prefix length 

 

if-match ipv6 { address | next-hop | route-source } { acl acl6-number | prefix-list ipv6-prefix-name } 

undo if-match ipv6 { address | next-hop | route-source } [ acl | prefix-list ] 

Route policy view 

2: System level 

address: Matches the destination address of IPv6 routing information.  

next-hop: Matches the next hop of IPv6 routing information.  

route-source: Matches the source address of IPv6 routing information.  

acl  acl6-number: Specifies the number of an IPv6 ACL for filtering, in the range 2000 to 3999 for 

address, and 2000 to 2999 for next-hop and route-source.  

prefix-list  ipv6-prefix-name: Specifies the name of a IPv6 prefix list for filtering, a string of 1 to 19 

characters. 

Use the if-match ipv6 command to configure a destination, next hop or source address based match 

criterion for IPv6 routes. 

Use the undo if-match ipv6 command to remove the match criterion. 

The match criterion is not configured by default. 

# Configure node 10 of route policy policy1 to permit routing information whose next hop address 

matches IPv6 prefix list p1. 

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10 

[Sysname-route-policy] if-match ipv6 next-hop prefix-list p1 

ip ipv6-prefix ipv6-prefix-name [ index  index-number ] { deny  | permit }  ipv6-address prefix-length 

[ greater-equal min-prefix-length ] [ less-equal max-prefix-length ]