3com S7906E Guide De Référence
1-4
(1.1.1.1, 224.1.1.1):
Attribute: Host Port
Host port unit board: Mask(0x8 3)
Host port(s):total 1 port.
GE2/0/2 (D)
MAC group(s):
MAC group address:0100-5e01-0101
Host port unit board: Mask(0x8 3)
Host port(s):total 1 port.
GE2/0/2
Table 1-2 display igmp group port-info command output description
Field
Description
Total 1 IP Group(s).
Total number of IP multicast groups
Total 1 IP Source(s).
Total number of IP multicast sources
Total 1 MAC Group(s).
Total number of MAC multicast groups
Port flags: D-Dynamic port, S-Static port,
C-Copy port
C-Copy port
Port flags: D for a dynamic port, S for a static port, and
C for a port copied from a (*, G) entry to an (S, G)
entry
C for a port copied from a (*, G) entry to an (S, G)
entry
Subvlan flags: R-Real VLAN, C-Copy VLAN
Sub-VLAN flags: R for a real egress sub-VLAN under
the current entry, and C for a sub-VLAN copied from a
(*, G) entry to an (S, G) entry
the current entry, and C for a sub-VLAN copied from a
(*, G) entry to an (S, G) entry
Router port(s)
Number of router ports
( 00:01:30 )
Remaining time of dynamic member port or router
port aging timer. To get this time value of a
non-aggregation port on a board other than the
SRPU, you must specify the number of the slot where
the corresponding board resides by using slot
slot-number. This is not required for an aggregation
port.
port aging timer. To get this time value of a
non-aggregation port on a board other than the
SRPU, you must specify the number of the slot where
the corresponding board resides by using slot
slot-number. This is not required for an aggregation
port.
IP group address
Address of the IP multicast group
MAC group address
Address of the MAC multicast group
Attribute
Attribute of the IP multicast group
Host port(s)
Number of member ports
display igmp interface
Syntax
display igmp [ all-instance | vpn-instance vpn-instance-name ] interface [ interface-type
interface-number ] [ verbose ]
View
Any view
Default Level
1: Monitor level