Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-13 
igmp last-member-query-interval 
Syntax 
igmp last-member-query-interval interval 
undo igmp last-member-query-interval 
View 
Interface view 
Default Level 
2: System level 
Parameters 
interval: IGMP last member query interval in seconds, with an effective range of 1 to 5.  
Description 
Use the igmp last-member-query-interval command to configure the last member query interval, 
namely the length of time the device waits between sending IGMP group-specific queries, on the 
current interface.  
Use the undo igmp last-member-query-interval command to restore the system default.  
By default, the IGMP last member query interval is 1 second. 
Related commands: last-member-query-interval, igmp robust-count, display igmp interface.  
Examples 
# Set the IGMP last member query interval to 3 seconds on VLAN-interface 100.  
<Sysname> system-view 
[Sysname] interface vlan-interface 100 
[Sysname-Vlan-interface100] igmp last-member-query-interval 3 
igmp max-response-time 
Syntax 
igmp max-response-time interval 
undo igmp max-response-time 
View 
Interface view 
Default Level 
2: System level 
Parameters 
interval: Maximum response time in seconds for IGMP general queries, with an effective range of 1 to 
25.