3com S7906E Guide De Référence

 

1-32 

[Sysname-Ethernet2/0/1] undo storm-constrain enable log 

storm-constrain enable trap 

undo storm-constrain enable trap 

Layer 2 Ethernet interface view 

2: System level 

None 

Use the storm-constrain enable trap command to enable trap message sending. With trap message 

sending enabled, the system sends trap messages when traffic reaching a port exceeds the 

corresponding threshold or the traffic drops down below the lower threshold after exceeding the upper 

threshold. 

Use the undo storm-constrain enable trap command to disable trap message sending. 

By default, trap message sending is enabled. 

# Disable trap message sending for Ethernet 2/0/1. 

<Sysname> system-view 

[Sysname] interface ethernet 2/0/1 

[Sysname-Ethernet2/0/1] undo storm-constrain enable trap 

storm-constrain interval seconds 

undo storm-constrain interval 

System view 

2: System level 

seconds: Interval for generating traffic statistics, in the range 1 to 300 (in seconds).