3com S7906E Guide De Référence

 

1-3 

interface-type interface-number: Specifies an interface by its type and number. This configuration can 

take effect only if PIM-SM is enabled on the interface.  

hash-length: Hash mask length, in the range of 0 to 32. If you do not include this argument in your 

command, the corresponding global setting will be used.  

priority: Priority of the C-BSR, in the range of 0 to 255. If you do not include this argument in your 

command, the corresponding global setting will be used. A larger value of this argument means a higher 

priority. 

Use the c-bsr command to configure the specified interface as a C-BSR.  

Use the undo c-bsr command to remove the related C-BSR configuration.  

No C-BSR is configured by default.  

Note that PIM-SM must be enabled on the interface to be configured as a C-BSR. 

Related commands: pim sm, c-bsr hash-length, c-bsr priority, c-rp.  

# Configure VLAN-interface 100 to be a C-BSR. 

<Sysname> system-view 

[Sysname] pim 

[Sysname-pim] c-bsr vlan-interface 100 

c-bsr admin-scope 

Public instance PIM view, VPN instance PIM view 

2: System level 

None 

Use the c-bsr admin-scope command to enable administrative scoping.  

Use the undo c-bsr admin-scope command to disable administrative scoping.  

By default, BSR administrative scoping is disabled, namely there is only one BSR in a PIM-SM domain.  

Related commands: c-bsr, c-bsr group, c-bsr global.