3com S7906E Guide De Référence
1-10
Description
Use the c-rp advertisement-interval command to configure the interval at which C-RP-Adv messages
are sent.
Use the undo c-rp advertisement-interval command to restore the system default.
By default, the C-RP-Adv interval is 60 seconds.
Related commands: c-rp.
Examples
# Set the global C-RP-Adv interval to 30 seconds in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-rp advertisement-interval 30
c-rp holdtime (PIM view)
Syntax
c-rp holdtime interval
undo c-rp holdtime
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
interval: C-RP timeout in seconds, with an effective range of 1 to 65,535.
Description
Use the c-rp holdtime command to configure the global C-RP timeout time, namely the length of time
the BSR waits before it must receive a C-RP-Adv message.
Use the undo c-rp holdtime command to restore the system default.
By default, the C-RP timeout time is 150 seconds.
Because a non-BSR router refreshes its C-RP timeout time through BSR bootstrap messages, to
prevent loss of C-RP information in BSR bootstrap messages, make sure that the C-RP timeout time is
not smaller than the interval at which the BSR sends bootstrap messages. The recommended C-RP
timeout setting is 2.5 times the BS period or longer.
Related commands: c-rp, c-bsr interval.
Examples
# Set the global C-RP timeout time to 200 seconds in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-rp holdtime 200