3com S7906E Guide De Référence

Page de 2327
 
1-46 
register-whole-checksum (PIM view) 
Syntax 
register-whole-checksum 
undo register-whole-checksum 
View 
Public instance PIM view, VPN instance PIM view 
Default Level 
2: System level 
Parameters 
None 
Description 
Use the register-whole-checksum command to configure the router to calculate the checksum based 
on the entire register message. 
Use the undo register-whole-checksum command to restore the default configuration. 
By default, the checksum is calculated based on the header in the register message.  
Related commands: register-policyregister-suppression-timeout.  
Examples 
# Configure the router to calculate the checksum based on the entire register message in the public 
instance.  
<Sysname> system-view 
[Sysname] pim 
[Sysname-pim] register-whole-checksum 
reset pim control-message counters 
Syntax 
reset pim all-instance | vpn-instance vpn-instance-name ] control-message counters [ interface 
interface-type interface-number ] 
View 
User view 
Default Level 
1: Monitor level 
Parameters 
all-instance: Specifies all instances. 
vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive 
string of up to 31 characters and must not contain any space.