3com S7906E Guide De Référence

 

1-11 

2: System level 

vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive 

string of up to 31 characters and must not contain any space. 

Use the msdp command to enable MSDP in the public instance or the specified VPN instance and 

enter public instance or VPN instance MSDP view.  

Use the undo msdp command to disable MSDP in the public instance or the specified VPN instance 

and remove the configurations performed in public instance or VPN instance MSDP view to free the 

resources occupied by MSDP. 

By default, MSDP is disabled.  

Note that: 

z 

If you do not specify vpn-instance, this configuration will take effect only on the public instance 

z 

IP multicast must be enabled in the corresponding instance before this command can take effect.  

Related commands: multicast routing-enable in Multicast Routing and Forwarding Commands of the 

Multicast Volume.  

# Enable IP multicast routing in the public instance, and enable MSDP in the public instance to enter 

public instance MSDP view.  

<Sysname> system-view 

[Sysname] multicast routing-enable 

[Sysname] msdp 

[Sysname-msdp] 

# Enable IP multicast routing in VPN instance mvpn, and enable MSDP in VPN instance mvpn to enter 

MSDP view of VPN instance mvpn. 

<Sysname> system-view 

[Sysname] ip vpn-instance mvpn 

[Sysname-vpn-instance-mvpn]route-distinguisher 100:1 

[Sysname-vpn-instance-mvpn] multicast routing-enable 

[Sysname-vpn-instance-mvpn] quit 

[Sysname] msdp vpn-instance mvpn 

[Sysname-msdp-mvpn] 

originating-rp interface-type interface-number 

undo originating-rp 

Public instance MSDP view, VPN instance MSDP view