3com S7906E Guide De Référence

 

1-12 

2: System level 

interface-type interface-number: Specifies an interface by its type and number.  

Use the originating-rp command to configure the address of the specified interface as the RP address 

of SA messages.  

Use the undo originating-rp command to restore the system default.  

Be default, the PIM RP address is used as the RP address of SA messages.  

# Specify the IP address of VLAN-interface 100 as the RP address of SA messages.  

<Sysname> system-view 

[Sysname] msdp 

[Sysname-msdp] originating-rp vlan-interface 100 

peer peer-address connect-interface interface-type interface-number 

undo peer peer-address 

Public instance MSDP view, VPN instance MSDP view 

2: System level 

peer-address: MSDP peer address.  

interface-type interface-number: Specifies an interface by its type and number. The local device will use 

the IP address of the specified interface as the source IP address when setting up a TCP connection 

with the remote MSDP peer.  

Use the peer connect-interface command to create an MSDP peer connection.  

Use the undo peer connect-interface command to remove an MSDP peer connection.  

No MSDP peer connection is created by default.  

Be sure to carry out this command before you use any other peer command; otherwise the system will 

prompt that the peer does not exist.  

Related commands: static-rpf-peer.