3com S7906E Guide De Référence
1-21
Default Level
2: System level
Parameters
peer-address: MSDP peer address.
rp-policy ip-prefix-name: Specifies a filtering policy based on the RP address in SA messages, where
ip-prefix-name is the filtering policy name, a case sensitive string of 1 to 19 characters. A policy name
must not contain any space.
Description
Use the static-rpf-peer command to configure a static RPF peer.
Use the undo static-rpf-peer command to remove a static RPF peer.
No static RPF peer is configured by default.
When you configure multiple static RPF peers, observe the follow rules:
1) If you use the rp-policy keyword for all the static RPF peers, all the static RPF peers take effect
concurrently. SA messages will be filtered as per the configured prefix list and only those SA
messages whose RP addresses pass the filtering will be accepted. If multiple static RPF peers use
the same filtering policy at the same time, when a peer receives an SA message, it will forward the
SA message to the other peers.
2) If you use the rp-policy keyword for none of the static RPF peers, according to the configuration
sequence, only the first static RPF peer whose connection is in the UP state will be activated, and
all SA messages from this peer will be accepted while the SA messages from other static RPF
peers will be discarded. When this active static RPF peer fails (for example, when the configuration
is removed or when the connection is torn down), still the first RPF peer whose connection is in UP
state will be selected as the activated RPF peer according to the configuration sequence.
Related commands: display msdp peer-status, ip prefix-list.
Examples
# Configure static RPF peers.
<Sysname> system-view
[Sysname] ip ip-prefix list1 permit 130.10.0.0 16 great-equal 16 less-equal 32
[Sysname] msdp
[Sysname-msdp] peer 130.10.7.6 connect-interface vlan-interface 100
[Sysname-msdp] static-rpf-peer 130.10.7.6 rp-policy list1
timer retry
Syntax
timer retry interval
undo timer retry
View
Public instance MSDP view, VPN instance MSDP view