3com S7906E Guide De Référence

 

1-1 

 

z 

The term “router” in this document refers to a generic router or an Ethernet switch running routing 

protocols. 

z 

For information about route policy commands, refer to Route Policy Commands in the IP Routing 

Volume. 

 

aggregate  ip-address  { mask | mask-length }  [  as-set | attribute-policy  route-policy-name | 

detail-suppressed | origin-policy route-policy-name | suppress-policy route-policy-name ] * 

undo aggregate ip-address { mask | mask-length } 

IPv4 MBGP address family view 

2: System level 

ip-address: Summary address.  

mask: Summary mask, in dotted decimal notation.  

mask-length: Summary mask length, in the range 0 to 32.  

as-set: Creates a summary with AS set. 

attribute-policy  route-policy-name: Sets the attributes of the summary route according to the route 

policy. The route policy name is a string of 1 to 19 characters. 

detail-suppressed: Advertises the summary route only. 

suppress-policy route-policy-name: Suppresses specific routes defined in the route policy. The route 

policy name is a string of 1 to 19 characters.  

origin-policy route-policy-name: References the route policy to determine routes for summarization. 

The route policy name is a string of 1 to 19 characters. 

The keywords of the command are described as follows: