3com S7906E Guide De Référence

 

1-30 

Use the filter-policy import command to configure the filtering of incoming routing information.  

Use the undo filter-policy import command to disable the filtering. 

By default, incoming routing information is not filtered. 

# In IPv4 MBGP address family view, reference ACL 2000 to filter incoming routing information. 

<Sysname> system-view 

[Sysname]bgp 100 

[Sysname-bgp]ipv4-family multicast 

[Sysname-bgp-af-mul] filter-policy 2000 import 

import-route protocol [ process-id [ med med-value | route-policy route-policy-name ] * ] 

undo import-route protocol [ process-id ] 

IPv4 MBGP address family view 

2: System level 

protocol: Redistributes routes from the routing protocol, which can be direct, isis,  nat,  ospf,  rip or 

static at present.  

process-id: Process ID, in the range 1 to 65535. It is available only when the protocol is isis, ospf or rip.  

med-value: Specifies a MED value for redistributed routes, ranging from 0 to 4294967295. If the 

argument is not specified, the cost of a redistributed route is used as its MED in the BGP routing 

domain. 

route-policy-name: Name of a route policy used to filter redistributed routes, a string of 1 to 19 

characters.  

Use the import-route command to enable route redistribution from a specified routing protocol.  

Use the undo import-route command to disable route redistribution from a routing protocol. 

By default, MBGP does not redistribute routes from other protocols. 

The origin attribute of routes redistributed with the import-route command is incomplete.  

# In IPv4 MBGP address family view, enable route redistribution from RIP.  

<Sysname> system-view 

[Sysname]bgp 100