Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-34 
peer allow-as-loop (MBGP family view) 
Syntax 
peer { group-name | ip-address } allow-as-loop [ number ] 
undo peer { group-name | ip-address } allow-as-loop 
View 
IPv4 MBGP address family view 
Default Level 
2: System level 
Parameters 
group-name: Name of an IPv4 MBGP peer group, a string of 1 to 47 characters. 
ip-address: IP address of an IPv4 MBGP peer. 
number: Specifies the number of times the local AS number can appear in routes from the peer/peer 
group, in the range 1 to 10. The default number is 1. 
Description 
Use the peer allow-as-loop command to allow the local AS number to exist in the AS_PATH attribute of 
routes from a peer/peer group, and to configure the number of times the local AS number can appear.  
Use the undo peer allow-as-loop command to remove the configuration. 
By default, the local AS number is not allowed. 
Related commands: display bgp multicast routing-table peer. 
Examples 
# In IPv4 MBGP address family view, configure the number of times the local AS number can appear in 
routes from the peer 1.1.1.1 as 2.  
<Sysname> system-view 
[Sysname]bgp 100 
[Sysname-bgp] peer 1.1.1.1 as-number 200 
[Sysname-bgp]ipv4-family multicast 
[Sysname-bgp-af-mul] peer 1.1.1.1 enable 
[Sysname-bgp-af-mul] peer 1.1.1.1 allow-as-loop 2 
peer as-path-acl (MBGP family view) 
Syntax 
peer { group-name | ip-address } as-path-acl as-path-acl-number { export | import } 
undo peer { group-name | ip-address } as-path-acl as-path-acl-number { export | import } 
View 
IPv4 MBGP address family view