3com S7906E Guide De Référence

 

1-2 

multicast-domain share-group group-address binding mtunnel mtunnel-number 

VPN instance view 

2: System level 

group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255. 

mtunnel-number: Number of the MTI interface to be created, in the range of 0 to 127.   

Use the multicast-domain share-group command to configure a share-group address and associate 

an MTI with the current VPN instance.   

Use the undo multicast-domain share-group command to restore the system default.   

By default, no share-group address is configured and no MTI is associated with a VPN instance.   

Note that: 

z 

Do not specify a multicast group address in the public network SSM group range as a share-group 

address; otherwise a share-MDT cannot be established.   

z 

This command must not be used repeatedly in the same VPN instance view. To configure a new 

group address and MTI for a VPN instance, you must remove the existing configuration.   

z 

IP multicast routing must be enabled in the VPN instance before this command can take effect. 

Related commands: multicast routing-enable in Multicast Routing and Forwarding Commands in the 

IP Multicast Volume.  

# Specify 224.1.1.1 as the share-group address in VPN instance mvpn and associate MTI 0 with the 

VPN instance.   

<Sysname> system-view 

[Sysname] ip vpn-instance mvpn 

[Sysname-vpn-instance-mvpn] multicast-domain share-group 224.1.1.1 binding mtunnel 0