Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-7 
host-aging-time (IGMP-Snooping view) 
Syntax 
host-aging-time interval 
undo host-aging-time 
View 
IGMP-Snooping view 
Default Level 
2: System level 
Parameters 
interval: Dynamic member port aging time, in seconds. The effective range is 200 to 1,000.  
Description 
Use the host-aging-time command to configure the aging time of dynamic member ports globally.  
Use the undo host-aging-time command to restore the default setting.  
By default, the aging time of dynamic member ports is 260 seconds.  
This command works only on IGMP Snooping–enabled VLANs, but not on VLANs with IGMP enabled 
on their VLAN interfaces.  
Related commands: igmp-snooping host-aging-time.  
Examples 
# Set the aging time of dynamic member ports globally to 300 seconds.  
<Sysname> system-view 
[Sysname] igmp-snooping 
[Sysname-igmp-snooping] host-aging-time 300 
igmp-snooping 
Syntax 
igmp-snooping 
undo igmp-snooping 
View 
System view 
Default Level 
2: System level 
Parameters 
None 
Description 
Use the igmp-snooping command to enable IGMP Snooping globally and enter IGMP-Snooping view.