Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-16 
[Sysname-vlan2] igmp-snooping enable 
[Sysname-vlan2] igmp-snooping last-member-query-interval 3 
igmp-snooping max-response-time 
Syntax 
igmp-snooping max-response-time interval 
undo igmp-snooping max-response-time 
View 
VLAN view 
Default Level 
2: System level 
Parameters 
interval: Maximum response time to IGMP general queries, in seconds. The effective range is 1 to 25.  
Description 
Use the igmp-snooping max-response-time command to configure the maximum response time to 
IGMP general queries in the VLAN.  
Use the undo igmp-snooping max-response-time command to restore the default setting.  
By default, the maximum response time to IGMP general queries is 10 seconds.  
This command takes effect only if IGMP Snooping is enabled in the VLAN.  
Related commands: igmp-snooping enable, max-response-time, igmp-snooping query-interval.  
Examples 
# Enable IGMP Snooping and set the maximum response time to IGMP general queries to 5 seconds in 
VLAN 2.  
<Sysname> system-view 
[Sysname] igmp-snooping 
[Sysname-igmp-snooping] quit 
[Sysname] vlan 2 
[Sysname-vlan2] igmp-snooping enable 
[Sysname-vlan2] igmp-snooping max-response-time 5 
igmp-snooping overflow-replace 
Syntax 
igmp-snooping overflow-replace [ vlan vlan-list ] 
undo igmp-snooping overflow-replace [ vlan vlan-list ] 
View 
Ethernet interface view, Layer 2 aggregate interface view, port group view