Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-24 
last-member-query-interval (IGMP-Snooping view) 
Syntax 
last-member-query-interval interval 
undo last-member-query-interval 
View 
IGMP-Snooping view 
Default Level 
2: System level 
Parameters 
interval: Interval between IGMP last-member queries, in seconds. The effective range is 1 to 5.  
Description 
Use the last-member-query-interval command to configure the interval between IGMP last-member 
queries globally.  
Use the undo last-member-query-interval command to restore the default setting.  
By default, the interval between IGMP last-member queries is 1 second.  
This command works only on IGMP Snooping–enabled VLANs, but not on VLANs with IGMP enabled 
on their VLAN interfaces.  
Related commands: igmp-snooping last-member-query-interval.  
Examples 
# Set the interval between IGMP last-member queries globally to 3 seconds.  
<Sysname> system-view 
[Sysname] igmp-snooping 
[Sysname-igmp-snooping] last-member-query-interval 3 
max-response-time (IGMP-Snooping view) 
Syntax 
max-response-time interval 
undo max-response-time 
View 
IGMP-Snooping view 
Default Level 
2: System level 
Parameters 
interval: Maximum response time to IGMP general queries, in seconds. The effective range is 1 to 25.