3com S7906E Guide De Référence
1-8
display mld ssm-mapping group
Syntax
display mld ssm-mapping group [ ipv6-group-address | interface interface-type interface-number ]
[ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-group-address: Specifies a multicast group by its IPv6 address, in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal
number ranging from 0 to F.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays the detailed multicast group information created based on the configured MLD SSM
mappings.
Description
Use the display mld ssm-mapping group command to view the multicast group information created
based on the configured MLD SSM mappings.
Note that:
z
If you do not specify an IPv6 multicast group, this command will display the information of all IPv6
multicast groups created based on the configured MLD SSM mappings.
z
If you do not specify an interface, this command will display the multicast group information created
based on the configured MLD SSM mappings on all interfaces.
Examples
# View the detailed information of IPv6 multicast group FF3E::101 created based on the configured
MLD SSM mappings on all interfaces.
<Sysname> display mld ssm-mapping group ff3e::101 verbose
Interface group report information
Vlan-interface1(FE80::101):
Total 1 MLD SSM-mapping Group reported
Group: FF3E::101
Uptime: 00:01:46
Expires: off
Last reporter: FE80::10
Group mode: include
Source list(Total 1 source):
Source: 30::1
Uptime: 00:01:46
Expires: 00:02:34
Last-listener-query-counter: 0