3com S7906E Guide De Référence

 

1-18 

2: System level 

interval: Startup query interval in seconds, namely, the interval between general queries the MLD 

querier sends on startup, with an effective range of 1 to 18000.  

Use the mld startup-query-interval command to configure the startup query interval on the current 

interface.  

Use the undo mld startup-query-interval command to restore the system default.  

By default, the startup query interval is 1/4 of the MLD query interval.  

 

By default, the MLD query interval is 125 seconds, so the startup query interval = 125 / 4 = 31.25 

(seconds).  

 

Related commands: startup-query-interval, mld timer query.  

# Set the startup query interval to 5 seconds on VLAN-interface 100.  

<Sysname> system-view 

[Sysname] interface vlan-interface 100 

[Sysname-Vlan-interface100] mld startup-query-interval 5 

mld static-group ipv6-group-address [ source ipv6-source-address ] 

undo mld static-group { all | ipv6-group-address [ source ipv6-source-address ] } 

Interface view  

2: System level 

all: Removes all static IPv6 multicast groups that the current interface has joined. 

ipv6-group-address: IPv6 multicast group address, in the range of FFxy::/16 (excluding FFx0::/16, 

FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal number ranging from 0 to 

F. .