3com S7906E Guide De Référence

Page de 2327
 
1-20 
 
 
By default, the values of the three parameters in the above-mentioned formula are 125, 2, and 10, 
respectively, so the MLD other querier present interval is 125 x 2 + 10 / 2 = 255 (seconds). 
 
Related commands: timer other-querier-present,  mld timer query,  mld robust-count,  mld 
max-response-timedisplay mld interface
Examples 
# Set the MLD other querier present interval to 200 seconds on VLAN-interface 100. 
<Sysname> system-view 
[Sysname] interface vlan-interface100 
[Sysname-Vlan-interface100] mld timer other-querier-present 200 
mld timer query 
Syntax 
mld timer query interval 
undo mld timer query 
View 
Interface view  
Default Level 
2: System level 
Parameters 
interval: MLD query interval, namely the amount of time in seconds between MLD general query 
messages, in the range of 1 to 18,000. 
Description 
Use the mld timer query command to configure the MLD query interval on the current interface. 
Use the undo mld timer query command to restore the system default. 
By default, the MLD query interval is 125 seconds. 
Related commands: timer querymld timer other-querier-presentdisplay mld interface
Examples 
# Set the MLD query interval to 200 seconds on VLAN-interface 100. 
<Sysname> system-view 
[Sysname] interface vlan-interface 100 
[Sysname-Vlan-interface100] mld timer query 200