3com S7906E Guide De Référence

Page de 2327
 
1-23 
<Sysname> reset mld group interface vlan-interface 100 ff03::101:10 
reset mld group port-info 
Syntax 
reset mld group port-info { all | ipv6-group-address } [ vlan vlan-id ] 
View 
User view 
Default Level 
2: System level 
Parameters 
all: Clears Layer 2 port information of all the MLD multicast groups. 
Ipv6-group-address: Clears Layer 2 port information of the specified MLD multicast group. The effective 
range of group-address is FFxy::/16, where x and y represent any hexadecimal number between 0 and 
F, inclusive. 
vlan-id: Clear Layer 2 port information of MLD multicast groups in the specified VLAN. The effective 
range of vlan-id is 1 to 4094.  
Description 
Use the reset mld group port-info command to clear Layer 2 port information of MLD multicast 
groups.  
Note that: 
Layer 2 ports for MLD multicast groups include member ports and router ports.  
This command cannot clear Layer 2 port information about MLD multicast groups of static joins.  
Related commands: display mld group port-info
Examples 
# Clear Layer 2 port information of all MLD multicast groups in all VLANs.  
<Sysname> reset mld group port-info all 
# Clear Layer 2 port information of all MLD multicast groups in VLAN 100. 
<Sysname> reset mld group port-info all vlan 100 
# Clear Layer 2 port information about multicast group FF03::101:10 in VLAN 100. 
<Sysname> reset mld group port-info ff03::101:10 vlan 100 
reset mld ssm-mapping group 
Syntax 
reset mld ssm-mapping group {  all | interface  interface-type interface-number {  all  
ipv6-group-address [ prefix-length ] ipv6-source-address prefix-length ] ] } } 
View 
User view